HOLOCENE ACTIVE CHARACTERISTICS OF THE NORTHERN SEGMENT OF THE MINJIANG FAULT IN THE EASTERN MARGIN OF THE TIBETAN PLATEAU     

LI Feng  LIU Hua-guo  JIA Qi-chao  XU Xi-wei  ZHANG Xiao-liang  GONG Fei 《地震地质》2018,40(1):97-106

As a part of the north-south seismic zone in China, a lot of M6.0-7.2 earthquakes have occurred in the margin faults of the Minshan block in history. This work attempted to characterize the geometry and activity of the north section of the Minjiang fault in this region based on high-resolution satellite images, geologic and geomorphic investigations, micro-geomorphic surveys, and trench excavation. The results show left-lateral-slip and Holocene activity of this structure. Along it, the offset landform has a continuous linearity on Ⅱ terraces near the Chuanpan village. The vertical height of the fault scarp measures 3.1 meters, which is almost the same as the accumulative horizontal displacement of the gully. The accumulative horizontal shortening due to faulting is 3.0 meters. Calculation using the model of displacement-dependent characteristic earthquakes shows both the vertical and horizontal co-seismic displacements and the horizontal shortening amount are about 1.0 meter. While strata dating suggests that the vertical and horizontal slip rates are all about 0.7-0.9mm/a, and the horizontal shortening rate is approximately 1.0-1.1mm/a. The excavated trench, perpendicular to the fault trace, reveals low-angle thrust dipping in 260åt 29°. From the relationship of the fault, colluvial wedge and stratigraphy ages, three palaeoseismic events are identified from youngest to oldest at 0-295a BP, 1 405-1 565a BP, and 2 750-2 875a BP, respectively, with recurrence intervals 1 110-1 565 years and elapsed time about 0-295 years。According to the relationship between magnitude and active parameters, it is considered that the northern segment of the Minjiang fault is capable of generating M7 or greater earthquakes. Now it is in the process of stress accumulation, having a certain seismic risk.  相似文献   

GPS约束下陇西地区断裂带现今滑动速率的非连续接触模拟研究     

孟庆筱  景鹏旭  何申海  党学会 《大地测量与地球动力学》2018,38(12):1227-1231

以中国地壳运动观测网络1999、2001、2004和2007年4期GPS观测数据为边界条件，使用非连续接触有限元技术构建陇西块体二维有限元模型，在摩擦系数不确定性分析基础上，计算区内主要断裂带滑动速率。结果表明，现今地壳形变运动状态下陇西块体的北东向运动在海原断裂附近受到鄂尔多斯块体、阿拉善块体阻碍，陇西块体周缘的海原断裂带、老虎山断裂、西秦岭北缘断裂呈现左旋走滑特征，滑动速率为3.5 mm/a、2.2 mm/a和1.9 mm/a，说明在青藏高原推挤作用下以上关键部位正在进行快速的构造应变积累。  相似文献   

Analytical study of ground motion caused by seismic wave propagation across faulted rock masses          下载免费PDF全文

J.C. Li  N.N. Li  S.B. Chai  H.B. Li 《国际地质力学数值与分析法杂志》2018,42(1):95-109

Studying seismic wave propagation across rock masses and the induced ground motion is an important topic, which receives considerable attention in design and construction of underground cavern/tunnel constructions and mining activities. The current study investigates wave propagation across a rock mass with one fault and the induced ground motion using a recursive approach. The rocks beside the fault are assumed as viscoelastic media with seismic quality factors, Q_p and Q_s. Two kinds of interactions between stress waves and a discontinuity and between stress waves and a free surface are analyzed, respectively. As the result of the wave superposition, the mathematical expressions for induced ground vibration are deduced. The proposed approach is then compared with the existing analysis for special cases. Finally, parametric studies are carried out, which includes the influences of fault stiffness, incident angle, and frequency of incident waves on the peak particle velocities of the ground motions.  相似文献   

Fault geometrical model of Dujiangyan section in Longmenshan fault zone          下载免费PDF全文

Hu-Rong Duan  Sheng-Lei Chen  Run Li  Quan-Chao Yan 《地震科学（英文版）》2018,31(3):126-136

The focal mechanism solution on the seismic fault plane can reflect the geometric and kinematic characteristics of faults, and it is an important way to further study the fine structure of fault plane. From the focal mechanism solution of the earthquakes around the Dujiangyan fault in Longmenshan fault zone, we derived the average dip angle of Dujiangyan fault is 45.1° based on the seismic moment tensor theory. In order to refine the fault geometry structure, this paper decomposed it into multiple sub-fault planes along the length and width of the fault plane and forms a number of models A13, B13, A23 a, A23 b, A23 c, B23 a,B23 b and B23 c, then calculated the sub-fault's dip of each model. In order to clarify exactly which one of the fault models is closest to the real fault model, the fault slip was carried out for each model in turn, then compared the surface displacement of each model with GPS observations. The results show that B23 c model with high dip in shallow and small dip in deep is the best model, the lengths of each subfault of Dujiangyan fault from south to north are 33 km, 21 km and 46 km, respectively. When the depth of the fault bottom is about 11 km, the dip angles are 70.56°, 67.41° and 45.55°.When the depth of the fault bottom is about 30 km, The fault dip angles are 44.55°, 29.18° and 44.25°.  相似文献   

STUDY ON THE SEISMOGENIC FAULT CHARACTERSTICS OF 2016 M_W5.9 MENYUAN EARTHQUAKE BASED ON Sentinel -1A DATA     

ZHENG Bo-wen  GONG Wen-yu  WEN Shao-yan  ZHANG Ying-feng  SHAN Xin-jian  SONG Xiao-gang  LIU Yun-hua 《地震地质》2018,40(4):872-882

In this paper, we processed and analyzed the Sentinel-1A data by "two-pass" method and acquired the surface deformation fields of Menyuan earthquake. The results show the deformation occurred mainly in the south wall of fault, where uplift deformation is dominant. The uplift deformation is significantly larger than the subsidence and the maximum uplift of ascending and descending in the LOS is 6cm, 8cm respectively. Meanwhile, based on the Okada model, we use the ascending and descending passes data as constraints to invert jointly the fault distribution and source parameters through constructing fault model of different dip directions. The optimum fault parameters are:The dip is 43°, the strike is 128°with the mean rake of 85°. The maximum slip is about 0.27m. The inverted seismic moment M₀ is 1.13×10¹⁸N·m, and the moment magnitude M_W is 5.9. The SW-dipping Minyue-Damaying Fault is possibly the seismogenic fault, based on the comprehensive analysis of the focal mechanisms, aftershocks relocation results and the regional tectonic background. The focus property is dominated by thrust movement with a small amount of dextral strike-slip component. The earthquake is the result of local stress adjustment nearby the Lenglongling Fault under the background of northeastward push and growth of Tibet Plateau.  相似文献   

招平断裂带中段深部结构构造——来自地震剖面的证据   总被引：1，自引：0，他引：1       下载免费PDF全文

单伟  于学峰  李洪奎  郭宝奎  耿科  李大鹏  禚传源 《山东国土资源》2018,34(5)

玲珑花岗岩岩基东侧的招平断裂带是胶西北矿集区的主要控矿构造之一。布设于招平断裂带中段大尹格庄矿区的地震剖面,揭示了招平断裂带中段深部的结构构造特征,地震剖面显示,玲珑岩基内部有多个类似"拱弧构造"的岩浆侵入形成的弧形界面,由此推测存在2~3期的岩浆活动。剖面显示了3期构造组合样式,第1期为以招平断裂带和宋家河断裂为组合倾向SE的铲式断裂,底部似汇入统一的构造滑脱带;第2期为倾向NW的错断了招平断裂带的反倾伸展断裂;第3期为NE向延伸以花状构造为特征的走滑断裂。前两期反映构造发育处于伸展环境,第3期显示为左行走滑。招平断裂带深部延伸存在分支复合现象,形成由2个主裂面夹持的透镜状岩片。地震反射剖面数据的获得对深刻理解该区域中生代岩浆构造演化过程和深部找矿具有重要的借鉴意义。  相似文献   

THREE-DIMENSIONAL DEFORMATION CHARACTERISTICS OF THE XIANSHUIHE FAULT ZONE     

ZHAO Jing  REN Jin-wei  JIANG Zai-sen  Yue Chong 《地震地质》2018,40(4):818-831

In order to analyze 3-dimensional movement and deformation characteristics and seismic risk of the Xianshuihe fault zone, we inverted for dynamic fault locking and slip deficit rate of the fault using the GPS horizontal velocity field of 1999-2007 and 2013-2017 in Sichuan-Yunnan region, and calculated annual vertical change rate to analyze the vertical deformation characteristics of the fault using the cross-fault leveling data during 1980-2017 locating on the Xianshuihe fault. The GPS inversion results indicate that in 1999-2007, the southeastern segment of the fault is tightly locked, the middle segment is less locked, and the northwestern segment is basically in creeping state. In 2013-2017, the southeastern segment of the fault is obviously weekly locked, in which only a patch between Daofu-Bamei is locked, and the northwestern segment is still mostly in creeping state, in which only a patch at southeastern Luhuo is slightly locked from surface to 10km depth. The cross-fault leveling data show that annual vertical change rate of the Zhuwo, Gelou, Xuxu and Goupu sites on the northwestern segment is larger, which means vertical movement is relatively active, and annual vertical change rate of the Longdengba, Laoqianning, and Zheduotang sites on the southeastern segment is small, which means the fault is locked, and the vertical movement changes little before and after the Wenchuan earthquake. Combining with the 3-dimensional movement and deformation, seismic activity and Coulomb stress on the Xianshuihe Fault, we consider the seismic risk of the southeastern segment is larger, and the Wenchuan earthquake reduced the far-field sinistral movement and the fault slip deficit rate, which may reduce the stress and strain accumulation rate and relieve the seismic risk of the southeastern segment.  相似文献   

Relocation of the Jinghe MS6.6 Earthquake Sequence on August 9, 2017 and Analysis of the Seismogenic Structure     

Liu Jianming  Gao Rong  Wang Qiong  Nie Xiaohong 《中国地震研究》2018,32(4):482-490

Based on the digital waveforms of the Xinjiang Digital Seismic Network,the Jinghe M_S6.6 earthquake sequence( M_L≥1. 0) were relocated by HypoDD,The characteristics of the spatial distribution and the seismogenic structure of this earthquake sequence were analyzed. The results show that the main shock is relocated at 44. 2639° N,82. 8294° E,and the initial rupture depth is 17. 6 km. The earthquake sequence clearly demonstrates a unilateral extension of about 20 km in the EW direction,and is mainly located at a depth of 7km-17 km. The depth profile along the aftershock direction shows that the focal depth of aftershocks tend to be shallower within 10 km to the west of the main shock,the focal depth of the aftershock sequence with the tail direction deflecting SW is deeper. The depth profile perpendicular to the earthquake sequence shows a gradual deepening of the seismic sequence from north to south,which indicates that the fault plane is dipping south.According to the focal mechanism solution,given by the Institute of Geophysics,China Earthquake Administration,and the geological structure of the seismic source region,it is inferred that the seismogenic structure of the Jinghe M_S 6.6 earthquake may be the eastern segment of the Kusongmuxieke fault.  相似文献   

茅山竹矿断层气定点观测场地勘选     

戴波  吴晓峰  张敏  孟科 《大地测量与地球动力学》2019,39(11):1202-1206

拟在茅山断裂带沿线布设若干个断层气连续观测点，建组断层气观测网。以茅山竹矿地区为例，通过断层气测量的初步结果，结合地质、人工地震、跨断层短水准等多种手段联合分析研究区断层的活动性，从而确定断层气定点观测的点位，为组建断层气观测网的选点提供借鉴和参考。  相似文献   

可可西里岩石圈向北俯冲到柴达木地幔的地震学证据          下载免费PDF全文

赵荣涛  赵文津  史大年  刘志伟  杨艳 《地球物理学报》2020,63(8):2940-2953

利用中美德INDEPTH IV合作项目2007—2009年间布置于青藏高原中、北部140个宽频地震台站记录到的天然地震数据,经过接收函数成像处理,获得了3条穿过昆仑—阿尼玛卿缝合带清晰的壳幔结构图像.结果显示柴达木南缘莫霍面位于约50 km深度,羌塘地块、可可西里地块、东昆仑造山带莫霍面位于约65 km深度,昆仑—阿尼玛卿缝合带以北约50 km存在莫霍面深度突变.在可可西里和柴达木岩石圈地幔之间观测到北倾界面,这可能是可可西里岩石圈向北俯冲到柴达木地幔之下的证据.可可西里地块地壳内宽缓的负转换震相带是低速带的反映,其向北挤入到东昆仑山下发生挤压增厚,可能是东昆仑山隆升的原因;由于刚性柴达木岩石圈的阻挡,物质向东改向,则可能是该地区向东旋转的构造应力场产生的原因.本文研究结果不支持亚洲岩石圈地幔在东昆仑—柴达木交界处向南俯冲,据此,我们提出了新的东昆仑造山模式.  相似文献